Western Digital Hard Disk Failure and Recovery

Western Digital hard drives for a variety of desktop and mobile devices. Interfaces delivered These drives come with SATA, SCSI and IDE. Another family of hard disk Mommoth, Saber, a hawk, Scorpion, and a pirate. Sometimes you see that the system is not a Western Digital hard drive has been set to recognize.

BIOS is not recognized, you get an error message failure, how you see the type of scraping and grinding noise from the hard disk or drive seems completely dead. In such situations it is necessary that you replace the disk immediately, because it may adversely affect the physical and try to extract the HDD technique to recover lost data manually.

For example, if you try to install can not start the computer by using Western Digital hard drive, you can make the following errors:
"WDC ROM MODEL - Family "
It means "Disc name", the name of Western Digital hard drive from the family.

CAUSE
These errors indicate a physical failure of hard disk. You get this error on the screen of the BIOS, which is created from the board of the controller on the PCB, if it can not recognize them healthy. Among the possible causes of this behavior are:
1.Hard disk damaged2.Corruption one or more modules of the firmware3.One read / write heads are imperfect
Decision
You need these steps to recover from the failure to:
1.Power system as soon as possible2.Detach drive from the system3.Install new hard drive4.Pack failed drive in an antistatic material and anti-shock and post it in the safe recovery of business data services

Wheels drive repair company to repair and restore all types of crash data from one physical disk. With the help of special tools and advanced methods of recovery, these companies charge to recover from disk failure in all cases. Common methods used to study the failed drive in a clean room, determine the rate of recovery and the nature of the problem, repair or replacement of damaged equipment and so on.